ACFM to SCFM
Output
Unit | Value |
---|---|
“H2O: | |
PSIG: | |
PSIA: | |
Flow Rate: |
SCFM to ACFM
Output
Unit | Value |
---|---|
“H2O: | |
PSIG: | |
PSIA: | |
Flow Rate: |
Unit | Value |
---|---|
“H2O: | |
PSIG: | |
PSIA: | |
Flow Rate: |
Unit | Value |
---|---|
“H2O: | |
PSIG: | |
PSIA: | |
Flow Rate: |
Expanding Our Commitment to Canadian Customers At Becker, we are always looking for ways to better serve our customers and expand our global footprint. That’s why we are thrilled to announce the opening of Becker Canada Vacuum Technology Corporation, a fully owned subsidiary located in Bolton, Ontario. This expansion marks a...
Researchers, teachers, and students rely on a dependable negative pressure source to deliver consistent, accurate, and repeatable lab results. When lab vacuum systems underperform or fail, even partially, it can delay or disrupt important research, skew results, damage equipment, reduce productivity, and even create unsafe working conditions. The most common...
Properly sizing plumbing pipes for a vacuum pump ensures the pump’s operating pressure is high enough to maintain the required vacuum at the end of the pipe without pressure disruptions. Certain types of vacuum systems require long lengths of piping between the pump and the operational head. For example, a...
To wire a Becker vacuum pump, follow common practices for wiring a 3-phase induction motor with 9 post terminals. The most common motor design for industrial pumps uses three phases of alternating current offset from each other by 120 degrees. Each phase is connected to two copper wire windings. As...
Effective vacuum equipment is essential in any fully equipped laboratory bench from high school and college through to the most advanced research institutions working on cutting-edge science. In every case, this equipment should be sized to meet your highest levels of demand while providing cost-effective operation at low or average...
Vacuum is essential to support many different laboratory test processes and equipment. The most common uses for a vacuum in a lab include filtering mixtures, removing unwanted fluids, or evaporating solvents. The type of vacuum pump needed for these processes will differ depending on the application required. Choosing the wrong...
Our goal is to respond to all care and employment inquiries within 24 hours of receipt. Our Becker Pumps Corporate offices are generally open Monday – Friday from 8am to 5pm EST time.